YIKANG

Cummins Cummins B6.7N (2018)


Power:200 - 240 hp
Torque:520 - 560 lb-ft
Certification:EPA 2018

Category:

100-249 HP

Keywords:

100-249 HP

  • Product Description
  • Specifications
  • Ratings
  • Maintenance
    • Commodity name: Cummins B6.7N (2018)

    Power:200 - 240 hp</br> Torque:520 - 560 lb-ft</br> Certification:EPA 2018

    Cummins introduces the new B6.7N natural gas engine for the school bus, shuttle, and medium-duty truck markets.  Rated up to 240 hp / 560 lb-ft torque, the B6.7N offers a reliable, low-emissions, and low cost option for your fleet.  The B6.7N is certified to California Air Resources Board Optional Low NOx standard of 0.02 g/bhp-hr – 90% lower

    NOx emissions than current EPA regulations.

    100% natural gas engine, featuring spark-ignited stoichiometric combustion with cooled EGR and a maintenance-free Three-Way Catalyst

    Closed Crankcase Ventilation (CCV) system and On-Board Diagnostics for optimal emissions performance

    Certified to California Air Resources Board Optional Low NOx 0.02 g/bhp-hr – 90% lower current EPA standard); exceeds 2017 EPA GHG requirements

    Cost-efficient and reliable performance

    Features & Benefits

    Electronic Control Module: A new engine control module, CM2380, provides full monitoring and control of the engine sensors, and the fuel and ignition systems. It offers faster processing to support heavy duty On-Board Diagnostics requirements (500K baud rate). It is also telematics capable, and provides improved diagnostics and durability.

    On-Board Diagnostics (OBD): The OBD system continuously monitors the engine and after-treatment system. It gives the vehicle owner or repair technician electronic access to the status of various vehicle subsystems for diagnostic purposes.

    Closed Crankcase Ventilation (CCV) system: The CCV system reduces engine emissions by capturing crankcase emissions and rerouting these gases back to the engine. This results in more complete combustion and lower emissions.

    Enhanced Three-Way Catalyst (TWC): TWCs are effective, simple, passive devices. They provide consistent emissions control performance, are maintenance-free and can be mounted vertically or horizontally on the vehicle. No active aftertreatment such as a diesel particulate filter or selective catalytic reduction is required.

    High-Energy Ignition System: A new Ignition Control Module (ICM) provides better performance and improved spark plug and coil durability, plus self-diagnostics.

  • NOx emission 0.02 g/bhp-hr (90% below EPA)
    Maximum Horsepower 240 HP / 179kW
    Peak Torque 560 lb-ft / 759 Nm
    Governed Speed 2400 RPM
    Type 4-cycle, spark-ignited, in-line 6 cylinder, turbocharged, CAC
    Engine Displacement 409 CU IN / 6.7 Liters
    Number of Cylinders 6
    Operating Cycles 4
    Net Weight (Dry) 1,150 lb / 522 KG
    Fuel Type CNG / LNG / Biomethane
    Aftertreatment Three-way Catalyst
    Base Warranty 2 years, Unlimited Miles
  • B6.7N < 33,000 lb (14,968 kg) GVW

    Overall, maintenance for the B6.7N  is similar to that of diesel engines, but there are a few key differences:

    Motor oil specifically formulated for natural gas engines is required. Do not use diesel engine oil in a natural gas engine. If diesel engine oil is used, valve torching, piston scuffing and reduction in spark-plug life will occur.  

    For more information, visit Cummins QuickServe Online.

    Maintenance Item^ Hours
    Oil And Filter* 750
    Spark Plugs 750
    Spin-on Fuel Filter 1,000
    Overhead Set Adjustment 1,500
    Coolant System Drain 6,000
    Closed Crankcase Ventilation Filter 2,000
    Ignition Coil Extension 5,000
    Air cleaner element Follow manufacturer's published recommendations

Packaging and delivery

JINING YIKANG INTERNATIONAL TRADE CO., LTD. is a high-end intelligent equipment manufacturing company integrating production, education and research. The company is located in Jining National High-tech Zone, covering an area of ​​40,000 square meters, including R&D center, office building, production workshop, warehouse, test field and other facilities.

Packaging and delivery

Customer visit

The company implements the strategy of "rooting in the local area and serving the world" and has established a stable cooperative relationship with Cummins, Shandong University, Engineering Machinery Association and other units. Adhering to the mission of "driving the world forward and realizing the most beautiful life", Cummins continues to empower customers with technological innovation to succeed and build a more efficient and cleaner future power world.

Customer visit

Factory appearance

The company was established in 2012 and has the qualification of Cummins authorized dealer. Its main business scope includes the sales and maintenance of Cummins engines and accessories, as well as the production and sales of small engines, generator sets and second-hand engines.

Factory appearance

Brochures

RELATED PRODUCTS